Manual download

Loading Manual This publication contains instructions for Methods other than described and the proper method of loading and illustrated are not acceptable. Introduction securing Volkswagen and Audi vehicles. Rev. 05 01 07 introduction General Information Transport of Volkswagen/Audi Loading/Unloading Procedures Convertible Models Tie Down Procedures Loose Protective Film Removal Contents Soft Tie down Strap Requirements Transport of Full Body Cover Models Solar Panel Equipped Models contents General Information A. Loading/Unloading Procedures 1. To ensure receipt of the proper vehicle, all Volkswagen/Audi vehicle 6. Tie down straps, chains, and hooks must be secured to prevent any identification numbers V.I.N. are located on the dashboard visible contact with the roof of vehicles when loading bottom position units. through the driver’ s side lower windshield. Chains must be removed from deck runways to prevent any tire damage 17 digit V.I.N. number example 3VWRT71K17M838290 or undercarriage interference. 2. Personnel must wear clean clothing free of objects that could cause 7. Automatic transmission vehicles must be set in park, manual transmission damage to the interior or exterior of the vehicle. Gloves are not to be wor n vehicles in first gear after vehicles are positioned. Parking brakes must inside the vehicle. Jewelry, if worn, and belt buckles, must be covered be firmly set before exiting the vehicle. by protective devices. Smoking inside vehicles is strictly prohibited. 8. Once vehicles are in final loading position, keys must be removed 3. Engines should not idle for extended periods prior to and during the from ignition, and left on the tether or placed in the left front door pocket. loading and unloading process, especially full body cover units, and Locking of all vehicles is required if the transport remains unattended. must be shut of f while in transit. 9. Drivers must never enter or exit a