Manual download

Audi A8 2003 2007 MMI swivelling unit repair manual Tools which you will need two pcs screwdriver any kind, for vent removing you can cover the metal part with any tape to prevent making scratches on the vents plastic flat screwdriver torx 9 torx 15 torx 20 hex 4 cutter pliers two plastic tie strap Please follow the steps in order as you see in the manual Display must be open to remove the swivelling unit. You have to open it by the open/close button, or switching ignition on . If your MMI doesn’t open fully, don’t worry, you can also get it out. If your MMI doesn’t open at all, you have to try push up by hand while you push the open/close button. with ignition on, and switch ignition off, when you removed it, so you can close the car if You can remove the display and the unit you need to, while you are changing the gears. If you are working in a garage so you dont have to close the car,you can also remove the battery negative terminal 10 size wrench , after you opened the MMI, so it will stay opened the whole time when you working on the unit. First you have to remove all the dash panel vents Turn knurled wheel 3 of air vent fully up. Above bottom slat 2 , insert the two small screwdriver 1 in each of the two air vent clips. Alternating between left and right side, pull air vent out of opening, taking care to ensure that screwdrivers remain in position. Unplug connector at air vent. Repeat the process for all vents Remove the coin holder trim Open coin holder. Slide trim for coin holder to left out of fastener and detach and close the holder. Remove the right and left side trims Open glove box. Starting from above glove box, carefully separate trim panel with switch panel 1 from dash panel using a tape covered flat srewdriver, or a plastic visa card, or any flat tool which will not scratch the surface. Detach trim panel with switch panel in direction of arrow . Be carefull when removing, th