Manual download

INDEX TECHNICIANS DIAGNOSTIC GUIDE BMW, AUDI, PORSCHE SELECTOR LEVER POSITIONS Park, and should only be selected when the vehicle is at a standstill. First apply the hand brake, and P . Refer to Figure 99. then select the Park position with the manual lever Reverse, and should only be selected when the vehicle is at a standstill with engine at idle. R Refer to Figure 99. Neutral, and may be selected when the vehicle is at a standstill, but first applying the handbrake. May N also be selected while vehicle is moving, to restart the engine or to counteract a skidding concern. Refer to Figure 99. Drive, is the standard position for normal driving in the XE program AGS and provides automatic D . The adaptive transmission upshifts from 1st to 5th and automatic downshifts from 5th to 1st gear top and Go, T railer control AGS system contains various driving programs such as S Towing, These programs are selected Mountain Driving, City Driving and Highway Driving constant speed . by the Electronic Control Unit ECU , which automatically modifies the transmissions shift character e speed. istics according to rolling resistance, engine load, accelerator pedal movement and vehicl The standard Drive position is position 1 , as shown in Figure 99. S Program The S Program is a performance oriented program, where the gear changing characteristics of the transmission are moved up to higher engine speeds. To select the S Program, the selector lever is shifted The S to the left hand gate position 2 in Figure 99 , without moving shift lever towards plus or minus. Program provides automatic upshifts from 1st to 4th and automatic downshifts from 4th to 1st gear. 5th gear is inhibited when the S Program is selected. M Program The M Program is a manual shift program which is activated by simply pushing the selector lever towards the minus sign for sequential downshifts and towards the plus sign for sequential upshifts, while